BAS28 All information provided in this document is subject to legal disclaimers. ? NXP B.V. 2010. All rights reserved.
Product data sheet Rev. 3 — 22 July 2010 10 of 12
NXP Semiconductors
BAS28
High-speed double diode
13. Legal information
13.1 Data sheet status
[1] Please consult the most recently issued document before initiating or completing a design.
[2] The term ‘short data sheet’ is explained in section “Definitions”.
[3] The product status of device(s) described in this document may have changed since this document was published and may differ
in case of multiple device
s. The latest product status
information is available on the Internet at URL
http://www.nxp.com.
13.2 Definitions
Draft — The document is a draft version only. The content is still under
internal review and subject to formal approval, which may result in
modifications or additions. NXP Semiconductors does not give any
representations or warranties as to the accuracy or completeness of
information included herein and shall have no liability for the consequences of
use of such information.
Short data sheet — A short data sheet is an extract from a full data sheet
with the same product type number(s) and title. A short data sheet is intended
for quick reference only and should not be relied upon to contain detailed and
full information. For detailed and full information see the relevant full data
sheet, which is available on request via the local NXP Semiconductors sales
office. In case of any inconsistency or conflict with the short data sheet, the
full data sheet shall prevail.
Product specification — The information and data provided in a Product
data sheet shall define the specification of the product as agreed between
NXP Semiconductors and its customer, unless NXP Semiconductors and
customer have explicitly agreed otherwise in writing. In no event however,
shall an agreement be valid in which the NXP Semiconductors product is
deemed to offer functions and qualities beyond those described in the
Product data sheet.
13.3 Disclaimers
Limited warranty and liability — Information in this document is believed to
be accurate and reliable. However, NXP Semiconductors does not give any
representations or warranties, expressed or implied, as to the accuracy or
completeness of such information and shall have no liability for the
consequences of use of such information.
In no event shall NXP Semiconductors be liable for any indirect, incidental,
punitive, special or consequential damages (including - without limitation - lost
profits, lost savings, business interruption, costs related to the removal or
replacement of any products or rework charges) whether or not such
damages are based on tort (including negligence), warranty, breach of
contract or any other legal theory.
Notwithstanding any damages that customer might incur for any reason
whatsoever, NXP Semiconductors’ aggregate and cumulative liability towards
customer for the products described herein shall be limited in accordance
with the Terms and conditions of commercial sale
of NXP Semiconductors.
Right to make changes — NXP Semiconductors reserves the right to make
changes to information published in
this document, including without
limitation specifications and product descriptions, at any time and without
notice. This document supersedes and replaces all information supplied prior
to the publication hereof.
Suitability for use — NXP Semiconductors products are not designed,
authorized or warranted to be suitable for use in life support, life-critical or
safety-critical systems or equipment, nor in applications where failure or
malfunction of an NXP Semiconductors
product can reasonably be expected
to result in personal injury, death or severe property or environmental
damage. NXP Semiconductors accepts no liability for inclusion and/or use of
NXP Semiconductors products in such equipment or applications and
therefore such inclusion and/or use is at the customer’s own risk.
Applications — Applications that are described herein for any of these
products are for illustrative purposes only. NXP Semiconductors makes no
representation or warranty that such applications will be suitable for the
specified use without further testing or modification.
Customers are responsible for the design and operation of their applications
and products using NXP Semiconductors products, and NXP Semiconductors
accepts no liability for any assistance with applications or customer product
design. It is customer’s sole responsibility to determine whether the NXP
Semiconductors product is suitable and fit for the customer’s applications and
products planned, as well as for the planned application and use of
customer’s third party customer(s). Customers should provide appropriate
design and operating safeguards to minimize the risks associated with their
applications and products.
NXP Semiconductors does not accept any liability related to any default,
damage, costs or problem which is based
on any weakness or default in the
customer’s applications or products, or
the application or use by customer’s
third party customer(s). Customer is responsible for doing all necessary
testing for the customer’s applications and products using NXP
Semiconductors products in order to avoid a default of the applications and
the products or of the application or use by customer’s third party
customer(s). NXP does not accept
any liability in this respect.
Limiting values — Stress above one or more limiting values (as defined in
the Absolute Maximum Ratings System of IEC 60134) will cause permanent
damage to the device. Limiting values are stress ratings only and (proper)
operation of the device at these or any other conditions above those given in
the Recommended operating conditions section (if present) or the
Characteristics sections of this document is not warranted. Constant or
repeated exposure to limiting values will permanently and irreversibly affect
the quality and reliability of the device.
Terms and conditions of commercial sale — NXP Semiconductors
products are sold subject to the general terms and conditions of commercial
sale, as published at http://www.nxp.com/profile/terms, unless otherwise
agreed in a valid written individual agreement. In case an individual
agreement is concluded only the terms and conditions of the respective
agreement shall apply. NXP Semiconductors hereby expressly objects to
applying the customer’s general terms and conditions with regard to the
purchase of NXP Semiconductors products by customer.
No offer to sell or license — Nothing in this document may be interpreted or
construed as an offer to sell products that is open for acceptance or the grant,
conveyance or implication of any license under any copyrights, patents or
other industrial or intellectual property rights.
Export control — This document as well as the item(s) described herein
may be subject to export control regulations. Export might require a prior
authorization from national authorities.
Document status[1][2]
Product status[3]
Definition
Objective [short] data sheet Development This
document contains data from the objecti
ve specification for product development.
Preliminary [short] data sheet Qualification This document
contains data from the preliminary specification.
Product [short] data sheet Production This document contains the product specification.
发布紧急采购，3分钟左右您将得到回复。
相关PDF资料
BAS31
DIODE SS 120V 200MA SOT23
BAS35
DIODE GEN PURP 120V 200MA SOT-23
BAS40-04LT1G
DIODE SCHOTTKY DUAL 40V SOT23
BAS40-06LT1G
DIODE SCHOTTKY 40V CA SOT23
BAS40BRW-7
DIODE SCHOTTKY ARRAY 40V SC70-6
BAS40V-7
DIODE SCHOTTKY 150MW 40V SOT-563
BAS56,235
DIODE ARRAY 60V 200MA SOT143
BAS70-04-V-GS08
DIODE SCHOTKY SS 70V 200MA SOT23
相关代理商/技术参数
BAS28,235
功能描述:二极管 - 通用，功率，开关 DIODE SW TAPE-11 RoHS:否 制造商:STMicroelectronics 产品:Switching Diodes 峰值反向电压:600 V 正向连续电流:200 A 最大浪涌电流:800 A 配置: 恢复时间:2000 ns 正向电压下降:1.25 V 最大反向漏泄电流:300 uA 最大功率耗散: 工作温度范围: 安装风格:SMD/SMT 封装 / 箱体:ISOTOP 封装:Tube
BAS28
制造商:NXP Semiconductors 功能描述:DIODE DUAL SOT-143
BAS28.215
制造商:PHILIPS 制造商全称:NXP Semiconductors 功能描述:High-speed double diode
BAS28/T1
制造商:未知厂家 制造商全称:未知厂家 功能描述:DIODE HIGH SPEED
BAS28_07
制造商:INFINEON 制造商全称:Infineon Technologies AG 功能描述:Silicon Switching Diode
BAS28_10
制造商:CENTRAL 制造商全称:Central Semiconductor Corp 功能描述:SURFACE MOUNT DUAL, ISOLATED HIGH SPEED SILICON SWITCHING DIODES
BAS281
制造商:VISHAY 制造商全称:Vishay Siliconix 功能描述:Schottky Barrier Diodes
BAS281_08
制造商:VISHAY 制造商全称:Vishay Siliconix 功能描述:Small Signal Schottky Diodes